valve cover gasket sealant or not

Ensured area for the Rocker Cover Gasket was cleaned well. If the valve cover is not secured within 4 minutes the sealant must be removed and the sealing area cleaned with metal surface prep.

Valve Cover Gasket Replacement Procedure Long No 56k

Apply a bead of silicone gasket and sealant in 2 places where the engine front cover meets.

. Mist with water to speed cure. Firmly screw straw assembly onto valve and dispense SLOWLY. If applied outdoors be sure to paint or cover foam to prevent discoloration and UV.

I felt it was a head gasket leak and went ahead and purchased the Radiator and block sealer I went through the process as described on the container and it did not help. Valve Cover LH continued INSTALLATION. Hi I have a 2001 Mitsubishi Montero Sport it has been blowing a lot of white fine smoke.

The can should not be exposed to temperatures more than 120F. My next step was to purchase the large Head Gasket sealer I have used approximately 34 of the container and. Has been working fine over the past month after.

Trim cured foam with serrated blade. Failure to follow this procedure can cause future oil leakage. Applied without any silicone gasket sealant as some people suggest.

Stens New Valve Cover Gasket 475-452 Compatible withReplacement for Briggs Stratton 690971. Cured foam should not be exposed to temperatures in excess of 240F. Briggs Stratton 690971 Rocker Cover Gasket Replaces 273486 690971.

Tips For Installing Press In Place Valve Cover Gaskets Fel Pro Gaskets Youtube